[Company Logo Image] BV Detailing & Design, Inc.

      Copyright 2010 BV Detailing & Design, Inc.

 


Home

US Express Corp HQBeverly Briley BldgSchermerhornCorvette MuseumFL SR836 Toll PlazaHippodrome PACBeverly Briley Bldg

Country Music HOFWoodland ParkGivens EstatesCongregation MicahBentonvilleAmerican GeneralPerimeter Church

PicturesImages

BV Detailing has successfully completed more than 600 projects over the last 30 years.
 
Aircraft Braking Systems
Location: Danville, KY
Fabricator: Fabarc Steel Supply, Inc.
 
US Express Corporate Office Building

Location: Chattanooga, TN
Fabricator: Gentry Steel, Inc.
 
Beverly Briley Building

Location: Nashville, TN
Fabricator: Wylie Steel Fabricators, Inc.
 
Schermerhorn Symphony Center

Location: Nashville, TN
Fabricator: Fabarc Steel Supply, Inc.
 
Corvette Museum
Location: Bowling Green, KY
Fabricator: Grace & Wylie Fabricators, Inc.
This project was a feature in the November 1994 issue of Modern Steel Construction.

SR 836 Toll Plaza
Location: Miami, Florida
Fabricator: Tate Fabricating Co., Inc.

Hippodrome Performing Arts Center
Location: Baltimore, MD
Fabricator: Steelfab of Georgia, Inc. (Dublin, GA.)

Country Music Hall of Fame
Location: Nashville, TN
Fabricator: FabArc Steel Supply, Inc.
 
Woodland Park Baptist Church
Location: Chattanooga, TN
Fabricator: Gentry Steel, Inc.
 
Givens Estates
Location: Asheville, NC
Fabricator: Steelfab, Inc. (Charlotte, NC)
 
Congregation Micah
Location: Nashville, TN
Fabricator: Hickory Steel, Inc. (Burns, TN)
This project was a feature in the April 1998 issue of Modern Steel Construction.
 
Northwest Medical Center of Benton County
Location: Bentonville, Arkansas
Fabricator: Fabarc Steel Supply, Inc.
 
American General Headquarters
Location: Brentwood, TN
Fabricator: Wylie Steel Fabricators, Inc.
Approx. 1400 tons
 
Perimeter Church
Location: Duluth, GA.
Fabricator: FabArc Steel Supply, Inc.

Project Pictures

Project Images

Shertech, Inc. Pharmacy Services
Location: Duncan, SC
Fabricator: Steelworks of the Carolinas, Inc.
Approximately 60 tons
 
Dallas Executive Airport
Location: Dallas, Texas
Fabricator: Irwin Steel
This three building project was quite challenging. Total tonnage is approximately 112.

Digester Support Structure
Location: Peru, Illinois
Fabricator: Steelworks of the Carolinas, Inc.

South Lake Hospital Expansion
Location: Clermont, FL
Fabricator: Fabarc Steel Supply, Inc.

St. Thomas Hospital - D&T Building, K Tower Expansion, and Surgery Addition
Location: Nashville, TN
Fabricator: Fabarc Steel Supply, Inc.
 
Nashville International Airport - Concourses
Location: Nashville, TN
Fabricator: Kingston Steel, Inc.
Some trivia:
This job was detailed in the spring of 1986. Much of this job was detailed with Autocad - possibly version 2.18. BV Detailing had just purchased a 19" Mitsubishi 6920LPAG monitor and an Artist graphics card ($4400) that would display 1024x768 color. Prior to that BV Detailing used a Princeton Graphics 13" monochrome monitor with a Hercules card (348x762). Piecemarks were added to the erection plans by hand. Drawings were plotted to preprinted fabricator sheet outlines. Most scrubbing of computer generated drawings was done by hand. This is the first job for BV Detailing that required connection design calculations. A Lotus 123 spreadsheet was setup for many of the tabulated connection values. BV developed typical connection tables that were revised and updated when calculations were required on later projects and as AISC standards evolved.
 
Nashville Convention Center
Location: Nashville, TN
Fabricator: Kingston Steel, Inc.
 
Starwood Amphitheater
Location: Antioch, TN
Fabricator: Kingston Steel, Inc.
 
Cobb County State Court Building
Location: Cobb County, GA
Fabricator: Fabarc Steel Supply, Inc.
 
Toringdon III

Location: Charlotte, NC
Fabricator: Steelfab, Inc.
Approx. 415 tons
Pilot Field
Location: Buffalo, NY
Fabricator: Kingston Steel, Inc.
Approx. 1800 tons
 
Quorum - Carolinas Hospital System
Location: Florence, SC
Fabricator: Fabarc Steel Supply, Inc.
Approx. 2300 tons
 
Vanderbilt Children's Hospital
Location: Nashville, TN
Transfer Girder 1
Transfer Girder 2
 
Whitehead Research at Emory University
Location: Atlanta, GA
Fabricator: Steelfab of Alabama
Structural Engineer: Stan Lindsey and Associates (Atlanta office)
Contractor: Whiting Turner

 Truss Geometry

Python Scripts


     

       Send mail to BV Detailing with questions or comments about this web site.
       Last modified: 02/24/10
       This website is maintained by Bruce Vaughan using Microsoft Frontpage.